Inter Products Marketing Sdn Bhd
Klang, Selangor, Malaysia.
+6016-305 9138

SONIK-S GA142S Safety Data-Logging Sound System, Class 1

Previous 6 / 6 Next

SONIK-S GA142S Safety Data-Logging Sound System, Class 1 Noise Safety Class1 Noise Meter / Noise Dosimeter Industrial Hygiene


Castle / NK122

SONIK-S GA142S Safety Data-Logging Sound System, Class 1

SONIK GA142S (Class 1) Safety Data-logging Sound Meter c/w Calibrator (Dual level, Class 1) (Includes GA690 Barometer), dBdataPRO Noise Analysis Software & Cable, Protective System Carry Case and dBAir Rubber Case

 
Easy Operation and Setup
24+ Hours Battery Life
On-Going Warranty
Fully compliant to IES 61672-1:2013
Simultaneous Measurements
Multiple Applications
 
The SONIK-S helps you protect your workforce from over exposure to noise, and helps you ensure your company is complying with The Control of Noise at Work Regulations 2005.
 
With it’s simple measurement set up and intuitive interface, the SONIK-S makes conducting occupational noise surveys simple and straightforward.
Housed in a modern and attractive body, it has a large colour screen, easy to use interface and is fully compliant with IEC 61672-1:2013 and IEC61252:1993.
 

Features of the Sonik-S Sound Meter

Hearing Protection using the HML method
User Modes: Noise at Work, Environmental or All
Save results to internal flash memory
Download data to a PC via a USB connection
Noise Analysis Software included with the meter
Small and light weight, fits into small shirt or jacket pocket and also supplied with a strong pocket clip
Measure from 25dB up to 140dB
Measure Lp, Leq, Lmax, LE, Pa2h, Lep'd, Dose, Dose Per Hour, L10, L90, L(user)
Measures parameters simultaneously including LAeq, LCeq and PeakC
Under range and Overload indicators
User selectable Exchange rate
Threshold and Criterion level
A, C or Z frequency weighting selection
A, C or Z Peak Measurements
''Slow, ''Fast'' and ''Impulse'' time weighting selection
Lockable Key pad through options
 

Technical Specification

Instrument Standards:
IEC 61672-1: 2002 Class 1 Group X
Languages:
English UK, English US, Chinese, French, German, Italian, Portuguese Brazilian, Russian, Spanish, Dutch, Greek
Level ranges:
Range Name Linear Range Peak Range
Low 25 – 100 dB 40 – 103 dB
Medium 45 – 120 dB 60 – 123 dB
High 65 – 140 dB 80 – 143 dB
Frequency Range
1  Hz - 20 kHz (electrical characteristics)
Class 1: 10 Hz - 20 kHz (including microphone)
Microphone:
Class 1:
 ½” Pre-Polarized - Free Field (IEC)
Pressure (ANSI) Sensititvity (25mV/Pa)
Measurement Channels: Two Microphone Preamplifier:
Low Noise, Removable Preamplifier
Parameters:
SONIK-S:

Lp, Leq, Lmax, Lpeak, Exposure Pa2h, Lep'd, %Dose, %Dose Per Hour, Points, Points Per Hour, Under Range, Overload
Noise Floor (Typical):
‘A’ Weighting < 16.0dB
’C’ Weighting < 17.2dB
‘Z’ Weighting < 18.9dB
Linear Operating range: 75 dB Display: 2.4” Full Colour TFT 240x320 pixels
Frequency Weighting:
‘A’, ‘C’ and ‘Z’
Combinations of ‘A’, ‘A’&’C’ simultaneous or ‘A’&’Z’ simultaneous available for Lp, Leq and Lmax
Batteries: 4 x AA (1. 5V) - Typically 20 hours continuous use (screen settings dependent)
Time Weighting: ‘Slow’, ’Fast’ and ‘Impulse’ External Power:Micro USB type B, 0.5A
Connections: Micro USB type B
Exchange rate: 3dB, 4dB or 5dB Environmental:
Temperature Operating Range: -10 to + 50ºC
Humidity: Up to 90% RH Non-Condensing
Criterion Level: 75dB, 80dB, 85dB or 90dB Case:
High Impact ABS plastic with membrane keypad
Threshold Level: -5dB, -10dB or OFF Size and Weight
Dimensions:

Including Pre-Amplifier:
260mm (H) x 67mm (W) x 26mm (D)
Excluding Pre-Amplifier:
184mm (H) x 67mm (W) x 26mm (D)
Memory: 4MB – Up to 4000 Data Intervals Maximum in one or multiple recordings Weight:
207g (Without Batteries


Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  

Switch to Mobile Version