Inter Products Marketing Sdn Bhd
Klang, Selangor, Malaysia.
+6016-305 9138

SONIK Environmental System with Occupational Noise Features, Class 1

Previous 6 / 10 Next

SONIK Environmental System with Occupational Noise Features, Class 1 Noise Safety and Environment Class1 Noise Meter / Noise Dosimeter Industrial Hygiene


Castle / NK121

SONIK Environmental System with Occupational Noise Features, Class 1

SONIK-SE Safety and Environmental Datalogging Sound Meter Class 1 (GA142SE) c/w Calibrator (Dual level, Class 1) (Includes GA690 Barometer), dBdataPRO Noise Analysis Software & Cable, Protective System Carry Case and dBAir Rubber Case

 
This Noise Measurement System is ideally suited to managers with occupational and environmental noise monitoring responsibilities.
If you're responsible for the safety and protection of employee's, this system provides you with everything you need to protect your workforce from over exposure to noise, as well as helping you ensure your company complies with The Control of Noise at Work Regulations 2005. This system also boasts a host of environmental parameters that are required for applications such as BS4142 (complaints about industry), BS5228 (construction noise), Planning Guidance and Boundary Monitoring.
 
 
 
Applications:
  • Occupational Noise Assessments for The Control of Noise at Work Regulations 2005
  • Hearing Protection Selection Assessments (via dBData software)
  • Simple Noise Level Testing
  • Fire Alarm Volume Testing
  • Machinery Servicing and Maintenance
  • Measurements for the Environmental Noise Regulations 2006 (EU Environmental Noise Directive)
  • Traffic Noise
  • Measurements in accordance with BS 5228
  • Neighbour Noise Nuisance
  • Community Noise Assessments
  • Measurements in accordance with BS4142:2014
  • Noise Nuisance from Industrial or Commercial Premises
  • Noise Measurements for PLanning
  • Sound Power
 
Instrument Standards:
IEC 61672-1: 2002 Class 2 Group X
Languages:
English UK, English US, Chinese, French, German, Italian, Portuguese Brazilian, Russian, Spanish, Dutch, Greek
Level ranges:
Range Name Linear Range Peak Range
Low 25 – 100 dB 40 – 103 dB
Medium 45 – 120 dB 60 – 123 dB
High 65 – 140 dB 80 – 143 dB
Quick Setup Modes (SONIK-SE Only): Noise at Work, Environmental, All Parameters
Frequency Range
1  Hz - 20 kHz (electrical characteristics)
Class 1: 10 Hz - 20 kHz (including microphone)
Microphone:
Class 1:
½” Pre-Polarized - Free Field (IEC)
Pressure (ANSI) Sensititvity (25mV/Pa)
Measurement Channels: Two Microphone Preamplifier:
Low Noise, Removable Preamplifier
Parameters:
SONIK-SE:

As SONIK-S, plus LE, L10, L90 and either L1, L5, L50, L95, L99
Noise Floor (Typical):
‘A’ Weighting < 16.0dB
’C’ Weighting < 17.2dB
‘Z’ Weighting < 18.9dB
Linear Operating range: 75 dB Display: 2.4” Full Colour TFT 240x320 pixels
Frequency Weighting:
‘A’, ‘C’ and ‘Z’
Combinations of ‘A’, ‘A’&’C’ simultaneous or ‘A’&’Z’ simultaneous available for Lp, Leq and Lmax
Batteries: 4 x AA (1. 5V) - Typically 20 hours continuous use (screen settings dependent)
Time Weighting: ‘Slow’, ’Fast’ and ‘Impulse’ External Power:Micro USB type B, 0.5A
Connections: Micro USB type B
Percentiles (SONIK-SE only):
L10, L90 and either L1, L5, L50, L95, L99
Connections: Micro USB type B
Exchange rate: 3dB, 4dB or 5dB Environmental:
Temperature Operating Range: -10 to + 50ºC
Humidity: Up to 90% RH Non-Condensing
Criterion Level: 75dB, 80dB, 85dB or 90dB Case:
High Impact ABS plastic with membrane keypad
Threshold Level: -5dB, -10dB or OFF Size and Weight
Dimensions:

Including Pre-Amplifier:
260mm (H) x 67mm (W) x 26mm (D)
Excluding Pre-Amplifier:
184mm (H) x 67mm (W) x 26mm (D)
Memory: 4MB – Up to 4000 Data Intervals Maximum in one or multiple recordings Weight:
207g (Without Batteries

Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  

Switch to Mobile Version