Inter Products Marketing Sdn Bhd
Klang, Selangor, Malaysia.
+6016-305 9138

Sonik-SE GA242SE Safety & Environmental Data-logging Sound Level Meter

Previous 5 / 9 Next

Sonik-SE GA242SE Safety & Environmental Data-logging Sound Level Meter Noise Safety and Environment Class2 Noise Meter / Noise Dosimeter Industrial Hygiene


Sonik-SE GA242SE Safety & Environmental Data-logging Sound Level Meter

GA242SE  SONIK-SE Sound Level Meter c/w KG205 Sound Meter Windshield, Free dBDataLITE Software and Free TheCastle Cloud Software

The SONIK-SE is a power sound level meter which is ideal for performing occupational and environmental noise assessments for a variety of applications.
Sound meters that do exactly what you need them to
Easy Operation and Setup
24+ Hours Battery Life
On-Going Warranty
Fully Compliant to IEC 61672-1:2013
Simultanous Measurements
Multiple Applications
The SONIK-SE has all the features required for performing Noise at Work assessments, but it also provides you with a host of environmental parameters that are required for measurements for numerous applications such as BS4142 (complaints about industry), BS5228 (construction noise), Planning Guidance and Boundary Monitoring to name just a few.
It's also really easy to use. You can ensure you're measuring the correct data by simply choosing one of the pre-set measurement templates, allowing you to easily switch between measurement for Occupational (Noise at Work) or Environmental Noise applications.
Instrument Standards:
IEC 61672-1: 2002 Class 2 Group X
English UK, English US, Chinese, French, German, Italian, Portuguese Brazilian, Russian, Spanish, Dutch, Greek
Level ranges:
Range Name Linear Range Peak Range
Low 25 – 100 dB 40 – 103 dB
Medium 45 – 120 dB 60 – 123 dB
High 65 – 140 dB 80 – 143 dB
Frequency Range
1 Hz - 20 kHz (electrical characteristics)
Class 2: 20Hz - 8kHz (including microphone)
Class 2: ½” Pre-Polarized - Free Field (IEC)
Pressure (ANSI) Sensititvity (25mV/Pa)
Measurement Channels: Two Microphone Preamplifier:
Low Noise, Removable Preamplifier
As SONIK-S, plus LE, L10, L90 and either L1, L5, L50, L95, L99
Noise Floor (Typical):
‘A’ Weighting < 16.0dB
‘C’ Weighting < 17.2dB
‘Z’ Weighting < 18.9dB
Linear Operating range: 75 dB Display: 2.4” Full Colour TFT 240x320 pixels
Frequency Weighting:
‘A’, ‘C’ and ‘Z’
Combinations of ‘A’, ‘A’&’C’ simultaneous or ‘A’&’Z’ simultaneous available for Lp, Leq and Lmax
Batteries: 4 x AA (1. 5V) - Typically 20 hours continuous use (screen settings dependent)
Time Weighting: ‘Slow’, ’Fast’ and ‘Impulse’ External Power:Micro USB type B, 0.5A
Quick Setup Modes (SONIK-SE Only):
Noise at Work, Environmental, All Parameters
Connections: Micro USB type B
Exchange rate: 3dB, 4dB or 5dB Environmental:
Temperature Operating Range: -10 to + 50ºC
Humidity: Up to 90% RH Non-Condensing
Criterion Level: 75dB, 80dB, 85dB or 90dB Case:
High Impact ABS plastic with membrane keypad
Percentiles (SONIK-SE only):
L10, L90 and either L1, L5, L50, L95, L99
Size and Weight
ncluding Pre-Amplifier:
260mm (H) x 67mm (W) x 26mm (D)
Excluding Pre-Amplifier:
184mm (H) x 67mm (W) x 26mm (D)
Threshold Level: -5dB, -10dB or OFF
Memory: 4MB – Up to 4000 Data Intervals Maximum in one or multiple recordings Weight:
207g (Without Batteries

Please leave your enquiry here, we will reply as soon as possible.
Company Name  
Product Interested  
Contact No.*  
*only support gif, jpeg, jpg, png, pdf

Switch to Mobile Version