GA2006H VEXO HARM Vibration System Vibration Safety HUMAN Vibration Environmental Selangor, Malaysia, Kuala Lumpur (KL), Klang Supplier, Suppliers, Supply, Supplies

Inter Products Marketing Sdn Bhd
Klang, Selangor, Malaysia.

+6016-305 9138

GA2006H VEXO HARM Vibration System

2 / 8

Castle / VK036
GA2006H VEXO HARM Vibration System

VEXO HARM Vibration Meter (GA2006H) with Vexo HARM Mounting Handle and VIBdataPRO Vibration analysis Software & Cable

This Hand Arm Vibration Meter, the Castle Vexo H, was designed to conduct highly accurate Hand Arm Vibration measurements of your tools and machinery, helping you to comply with The Control of Vibration at Work Regulations (2005).

This is the ideal piece of equipment for Health and Safety Managers to assess vibration exposure in the workplace, giving accurate vibration magnitude measurements of your own tools being used by your own employees.

It's supplied with a simple to attach tri-axial accelerometer with which simultaneous X, Y and Z readings are taken and displayed on the screen in real time. Measurements can be taken in M/S2 or in G, and results are given for Aeq, Peak and Vector Sum. Measured data is also calculated into the HSE's easy to use colour coded points system, and also displays the Exposure Action Value (EAV) and Exposure Limit Value (ELV) times.

Features:

Tri-axial vibration meter
Fully compliant with ISO 8041 : 2005
Large dynamic range
Re-chargeable battery pack and charger
Large 'Flash' memory
Rugged accelerometer and cable
Large colour display
Only 3 operational buttons for simple use

Taking Vibration Measurements for the Regulations

It's very important to consider that to defend personal injury claims in a court of law, only measure readings are considered to be evidence in your defence.

This best selling Hand Arm Vibration Meter, the Castle Vexo H, enables you to easily measure the vibration levels of the handheld power tools that your employees use, ensuring that your employees aren't over exposed to vibration levels over and above the Action and Limit Values stated in The Control of Vibration at Work Regulations 2005.

Once a measurement has been taken, this Hand Arm Vibration Meter, the Castle Vexo, will display an extremely accurate vibration magnitude level.

This vibration level can be calculated with the exposure time (actual exposure times can be found with a tool timer) into HSE Exposure Points - the HSE's guideline method of monitoring vibration exposure in the workplace. More information can be found on HSE Exposure Points - click here.

This Hand Arm Vibration Meter was designed to be nothing but easy to use, giving you the ability to measure large numbers of different hand held power tools in a day, whilst ensuring highly accurate results. Recorded Data is logged in the internal memory of the instrument, ready to be downloaded to the included free software, VibDATA Vibration Analysis Software. Data can also be viewed on screen for immediate use.

Built and supplied with long life rechargeable batteries, an additional pack can be purchased to ensure this Hand Arm Vibration Meter can be ready to use whenever you need it. Designed with a rugged and impact resistant body, you can be confident that your new investment will stand the test of time.

This Vexo H Hand Arm Vibration Meter and all it's accessories is supplied in an Attache Carry Case.

Start effectively measuring vibration exposure with the Castle Vexo H Hand Arm Vibration Meter to ensure HAVS doesn't become a problem with in workforce.

Technical Specification

Instrument Standards	ISO 8041 : 2005 Human Response to Vibration
	For compliance with:
	ISO 5349 : 2001 Measurement and evaluation of human exposure to hand-transmitted vibration
Range (Integration = Acceleration)	Low: 0.05 - 200.0m/s-2 / 0.005 - 20.4g
Range (Integration = Acceleration)	High: 0.50 - 2000.0m/s-2 / 0.05 - 204.0g
Measurement Channels	One
Parameters	Acceleration: Arms, Aeq, Amax, Peak, Vector Sum, HSE Exposure Points, EAV and ELV
Linear Operating Range	72dB
Frequency Weighting	WH - Hand Arm Filter
Memory	Flash memory storing up to 992 recordings
Transducer	Castle KD1010, 10mV/g
Noise Floor	<0.002 m/s-2 - Low Range
Noise Floor	<0.020 m/s-2 - High Range
Display	Full Colour Graphic OLED Display (160 x 128)
Batteries	NiMH re-chargeable cell pack
Batteries	Typically 10 hours continuous use
Connections	Input: 3.5mm Stereo Jack Socket
	AC Output: 4 Pole 3.5mm Jack Socket
	Download: USB Micro B (Cable Supplied)
	Recharge: DC Socket (Charger & Cable Supplied)
Languages	English UK, English US, Chinese, French, German, Italian, Portuguese Brazilian, Russian, Spanish
Temperature Operating Range	-10 to + 50ºC
Humidity	Up to 90% RH Non Condensing
Electromagnetic Compatibility	Designed in accordance with the following Electromagnetic Compatibility Directives:
	SI 2005/281
	2004/108/EC
Case	High Impact ABS plastic with tactile membrane keypad

Please leave your enquiry here, we will reply as soon as possible.
Name*
Company Name
Product Interested
Quantity
Email*
Contact No.*
Attachment		*only support gif, jpeg, jpg, png, pdf
Messages*