- Industrial Hygiene
- Environmental
- Analytical Laboratory
- Disc Filter Membrane
- Glass Fiber
- Silver Filter Membrane
- Ceramic Filter Membrane
- Aluminum Oxide Filter Membrane
- Mixed Cellulose Ester (MCE) Filter Membrane
- Nylon Filter Membrane
- Polytetrafluorothylene (PTFE) Filter Membrane
- Cellulose Acetate (CA) Filter Membrane
- Hydrophilic Polycarbonate (PCTE) Filter Membrane
- Hydrophobic Polycarbonate (PCTE) Filter Membranes
- PVDF Filter Membrane
- Polypropylene (PP) Filter Membrane
- Polyethersulfone (PES) Filter Membrane
- Polyacrylonitrile (PAN) Filter Membrane
- Hydrophilic, Polyester Track Etch (PETE) Filter Membrane
- Hydrophobic Polyester (PETE) Filter Membrane
- Polyether Ether Ketone (PEEK) Filter Membrane
- Regenerated Cellulose (RC) Filter Membrane
- Quantitative Filter Paper
- Qualitative Filter Paper
- Syringe Filter
- In-line Filter
- Botanical Filter Paper
- Microbiology
- Others
- Disc Filter Membrane
Inter Products Marketing Sdn Bhd
Klang, Selangor, Malaysia.
+6016-305 9138
Low Metals Water Analysis In-Line Filter
| Previous | 1 / 3 | Next |
A unique aqueous filtration unit ideal for dissolved heavy metals analysis based on the 50mm in line filtration platform. Units are available in two versions; Low metals and Very Low metals. The quartz microfiber prefilter in both units are inherently low metal content providing clean background signature in ground water dissolved heavy metals analysis methods. The Very Low metals version is proprietary HT technology which employs a complex annealing process to further reduce leaching of the quartz fiber, thus reducing extractable background signature.
The quartz microfiber pre-filter affords the ability to pass larger fluidic volume through the unit before plugging occurs at the Nylon membrane stage. The unit is operated with the clear side as inlet and white side as outlet. The unit may be connected inline via the stepped barbs or via a standard slip port syringe filter inserted into clear side step barb.
This filter unit demonstrates excellent lot-to-lot reproducibility and are verified against a standard using analysis techniques such as GC, TGA & DSC. Manufactured in the USA.
Technical Specifications
| Material Attributes: | Polypropylene filter units, 50mm inline configuration with hydrophilic Nylon membrane and low metals content 100% pure Quartz microfiber prefilter, 2 versions. |
| Primary Membrane: | Pure Nylon membrane 0.45μm |
| Pre filter: | Low metals Quartz microfiber or very low metals Quartz microfiber (HT) |
| Filtration area: | 20.0cm2 |
| Hose Barbs: | 5-15mm stepped, ID 4mm (consistent with syringe slip port OD) |
| Catalogue No. | Description | Packing size |
| IFLMQ50-2 | 50mm In-Line Filter with Low Metals Quartz prefilter and 0.45µm Nylon filter membrane | 2 |
| IFLMQ50-20 | 50mm In-Line Filter with Low Metals Quartz prefilter and 0.45µm Nylon filter membrane | 20 |
| IFLMQ50-50 | 50mm In-Line Filter with Low Metals Quartz prefilter and 0.45µm Nylon filter membrane | 50 |
| IFLMHTQ50-2 | 50mm In-Line Filter with Very Low Metals Quartz prefilter and 0.45µm Nylon filter membrane | 2 |
| IFLMHTQ50-20 | 50mm In-Line Filter with Very Low Metals Quartz prefilter and 0.45µm Nylon filter membrane | 20 |
| IFLMHTQ50-50 | 50mm In-Line Filter with Very Low Metals Quartz prefilter and 0.45µm Nylon filter membrane | 50 |