- Industrial Hygiene
- Environmental
- Analytical Laboratory
- Disc Filter Membrane
- Glass Fiber
- Silver Filter Membrane
- Ceramic Filter Membrane
- Aluminum Oxide Filter Membrane
- Mixed Cellulose Ester (MCE) Filter Membrane
- Nylon Filter Membrane
- Polytetrafluorothylene (PTFE) Filter Membrane
- Cellulose Acetate (CA) Filter Membrane
- Hydrophilic Polycarbonate (PCTE) Filter Membrane
- Hydrophobic Polycarbonate (PCTE) Filter Membranes
- PVDF Filter Membrane
- Polypropylene (PP) Filter Membrane
- Polyethersulfone (PES) Filter Membrane
- Polyacrylonitrile (PAN) Filter Membrane
- Hydrophilic, Polyester Track Etch (PETE) Filter Membrane
- Hydrophobic Polyester (PETE) Filter Membrane
- Polyether Ether Ketone (PEEK) Filter Membrane
- Regenerated Cellulose (RC) Filter Membrane
- Quantitative Filter Paper
- Qualitative Filter Paper
- Syringe Filter
- In-line Filter
- Botanical Filter Paper
- Microbiology
- Others
- Disc Filter Membrane
Inter Products Marketing Sdn Bhd
Klang, Selangor, Malaysia.
+6016-305 9138
PAS-500 Micro Air Sampler (Flow Rate: 5 to 200cc/min)
| Previous | 1 / 9 | Next |
- chemical exposure monitoring
- pompa pengambil sampel udara
- NIOSH OSHA
- Intrinsically Safe
- Low Flow Air Sampler
PAS-500 Micro Air Sampler (Flow Rate: 5 to 200cc/min)
PAS-500 Air Sampler c/w Holder for 6mm Charcoal tube, Screwdriver, Instruction Manual and 9-volt battery
Featuring all-in-one design (sampling tube, pump and battery) for colorimetric indicator, charcoal or other absorber tubes.
Features:
- Battery, pump, electronics and detector tube all in one compact, rugged module, eliminates cumbersome Tygon tubing and charcoal tube holder clipped to lapel.
- Light (4 oz.) and compact, with flame retardant case.
- Special clip ensures unit stays firmly in pocket.
- Flow range: 5 - 200cc/minute.
- Full flow regulation. A constant voltage is applied to pump as battery voltage drops.
- Low power consumption. A low cost (< $2.00) alkaline battery is sufficient for a 40-hour work week.
- Easily replaceable 9-volt battery. NiCad, zinc-carbon and alkaline types are interchangeable.
- Adaptable - accepts 6mm diameter (single and double) and 8mm diameter charcoal tubes, other absorber tubes and Draeger & Kitigawa colorimetric tubes.
- Intrinsically safe. Current-limiting resistor in battery circuit prevents danger of short-circuit spark.
Specifications
| Power Supply | 9V alkaline, zinc-carbon or rechargeable NiCad battery. |
| Dimensions | 1 3/16'' x 13/16'' x 4 1/4'' (30mm x 20mm x 109mm) excluding sampling tube holder |
| Weight | 4 oz. (114 grams). |
| Case Material | Flame retardant nylon, rated UL 94-VO. |
| Operating Temperature Range | 0 to 50 degrees Centigrade. |
| Flow | 5cc — 200cc/minute. |
| Operational Check | Glowing green L.E.D. indicates power is on. |
| Warranty | 90 days for all parts and workmanship. |
| Controls | Screwdriver adjustable flow rate. (Multi-turn potentiometer for precision setting.) Internal On/Off switch. |
| Electric Circuitry | Miniature, surface mount technology. |
Optional Accessories:
- Multi-Pump Carrying Case (holds up to eight units) 13 1/2'' x 10'' x 3 3/4”.
- Rechargeable Battery Kit (includes charger and battery).
- ATH-6 Charcoal Tube Holder for 6mm tubes.
- ATH-8 Charcoal Tube Holder for 8mm tubes and Perkin-Elmer ‘adsorber tubes.
- ATH-lO Holder for colorimetric tubes or two 6mm charcoal tubes in series for Methylene Chloride.
- Custom tube holders available upon request.
- BFM-10 Pocket Bubble Flow Meter.