- Industrial Hygiene
- Environmental
- Analytical Laboratory
- Disc Filter Membrane
- Glass Fiber
- Silver Filter Membrane
- Ceramic Filter Membrane
- Aluminum Oxide Filter Membrane
- Mixed Cellulose Ester (MCE) Filter Membrane
- Nylon Filter Membrane
- Polytetrafluorothylene (PTFE) Filter Membrane
- Cellulose Acetate (CA) Filter Membrane
- Hydrophilic Polycarbonate (PCTE) Filter Membrane
- Hydrophobic Polycarbonate (PCTE) Filter Membranes
- PVDF Filter Membrane
- Polypropylene (PP) Filter Membrane
- Polyethersulfone (PES) Filter Membrane
- Polyacrylonitrile (PAN) Filter Membrane
- Hydrophilic, Polyester Track Etch (PETE) Filter Membrane
- Hydrophobic Polyester (PETE) Filter Membrane
- Polyether Ether Ketone (PEEK) Filter Membrane
- Regenerated Cellulose (RC) Filter Membrane
- Quantitative Filter Paper
- Qualitative Filter Paper
- Syringe Filter
- In-line Filter
- Botanical Filter Paper
- Microbiology
- Others
- Disc Filter Membrane
Inter Products Marketing Sdn Bhd
Klang, Selangor, Malaysia.
+6016-305 9138
MultiDensity 1000 Glass Microfiber Filter, Binderless
| Previous | 2 / 11 | Next |
The MultiDensity™ product platform now includes this easy to use, thinner1 binderless glass microfiber filter which retains solids in a broad size range. Larger solids become entrapped on the built in pre-filter layer allowing the multiple density zones of filter to entrap finer solids rapidly and reliably. This yields a faster flow rate with higher fluidic capacity.
The borosilicate glass is highly resistive to aggressive solvents, acids (not compatible with hydrofluoric acid) and base with a usable range of 0-14pH and a wide effective temperature range of -200 to 500°C. However, it may become brittle and susceptible to cracking at < -100°C.
Up to 4x capacity of traditional glass microfiber filters in same porosity range
- Handles larger sample volumes or samples with higher ratio of solids.
- Less frequent filter changes = fewer variables in sample prep.
- 100% binderless glass microfiber, formed to create a built-in pre-filter
- Lower extractables for better quality analysis.
- Wide ranging chemical compatibility borosilicate glass.
Finely controlled porosity for consistent and reproducible results
- Extends the life of a membrane when used in series.
- Disk to disk results are consistent.
Laser cut for decreased fiber shedding and increased handling stability
- Fibers on cutline are fused together to form an easy to handle disk.
- Fewer extraneous fibers to wash out into filtrate.
Technical Specifications
| Particle Retention, µm | Air Flow Resistance (sec/100cc) | Nominal Caliper Thickness, mm | Basis Weight, g/m² |
| 1.0 | 60 | 0.8 | 171 |
| Catalogue No. | Description | Packing size |
| MD100025-20 | MultiDensity 1000 Binderless Glass Microfiber filter with 2.5cm diameter | 20 |
| MD100035-20 | MultiDensity 1000 Binderless Glass Microfiber filter with 3.5cm diameter | 20 |
| MD100047-20 | MultiDensity 1000 Binderless Glass Microfiber filter with 4.7m diameter | 20 |
| MD100055-20 | MultiDensity 1000 Binderless Glass Microfiber filter with 5.5cm diameter | 20 |
| MD100070-20 | MultiDensity 1000 Binderless Glass Microfiber filter with 7.0cm diameter | 20 |
| MD100090-20 | MultiDensity 1000 Binderless Glass Microfiber filter with 9.0cm diameter | 20 |
| MD1000110-10 | MultiDensity 1000 Binderless Glass Microfiber filter with 11.0cm diameter | 10 |
| MD1000125-10 | MultiDensity 1000 Binderless Glass Microfiber filter with 12.5cm diameter | 10 |
| MD1000142-10 | MultiDensity 1000 Binderless Glass Microfiber filter with 14.2cm diameter | 10 |